3:10 PM
danyrolux
So, after installing and rooting your Pipo Smart S1 tablet, the next thing to do is to install CWM on your Pipo S1.
Here is the easiest way to do that:
1. Put your Pipo S1 in 'firmware update mode'.
2. Download Pipo S1 CWM by Danyrolux.rar from here or from here, extract it and run RKAndroidTool.exe. Leave all the fields intact and press 'Flash Rom' button.
3. Wait for the proccess to finish and reboot your tablet. You're done!
4. [Optional] If you want to upgrade from CWM-based Recovery v6.0.2.7 to v6.0.2.8, then download this zip file, copy it on your micro SD card, reboot into recovery and install it. See the below video for details.
5. Update. Download and install like above CWM v.6.0.3.1 from here, here or here.
Attention!
For 4.2.2 firmware version you have to:
- Double click on recovery address and change it from '0x00010000' to '0x00014000'.
- Leave all the rest fields intact and press 'Flash Rom' button.
- Wait for the proccess to finish and reboot your tablet. You're done!
4. [Optional] If you want to upgrade from CWM-based Recovery v6.0.2.7 to v6.0.2.8, then download this zip file, copy it on your micro SD card, reboot into recovery and install it. See the below video for details.
5. Update. Download and install like above CWM v.6.0.3.1 from here, here or here.
Attention!
For 4.2.2 firmware version you have to:
- Double click on recovery address and change it from '0x00010000' to '0x00014000'.
- Leave all the rest fields intact and press 'Flash Rom' button.
- Wait for the proccess to finish and reboot your tablet. You're done!
Enjoy, share is love!
4 comentarii:
hi, i followed ur steps and did it for pipo s2 3g.. but after everything, how do i boot into cwm... what are the combination keys?
ok, so after all the steps done.. how do i boot into cwm mode if the system is not booting normal.. i have pipo s2... what are the combination keys pls
To boot in CWM try one of these:
1. Root your tablet, install 'Quick Boot' free from Play Store, launch the app and choose 'Boot into recovery' option.
2. Turn off the tablet, press 'Vol-' button and 'power on' button in the same time; when the firt boot image appears lose the 'power on' button but keep the 'Vol-' button pressed (this is for Pipo S1, but I guess it should work)
tnx bro i finally have a cwm on my tablet arcmobile 701d its a rebranded of pipo s1
Post a Comment