y How to easily install Windows 10 Pro with all drivers on Chuwi Hi8 tablet ~ China Gadgets Reviews

Aug 2, 2015

How to easily install Windows 10 Pro with all drivers on Chuwi Hi8 tablet


This is an easy steps tutorial on how to install Windows 10 Pro latest build on Chuwi Hi8 tablet:

1. Download latest Windows 10 Pro x86 build - en_windows_10_pro_10240_x86_dvd - from here. If you have problems, you can use the provided MediaCreationTool - for Win10.
2. Copy it on a micro SD card or USB flash, insert it into Chuwi Hi8 tablet, mount the image and start install the Windows 10 setup. In my case, I choose a clean install. Finish the setup and finally reboot into Windows 10 Pro.
3. Download Windows Drivers for Chuwi Hi8 tablet from here or here. For the Chuwi Hi8 drivers, please use Doubledriver to restore them all at once, alternatively you can extract and install them one by one, but it’s more laborious. If you have problems with the calibration of the display, make sure to install 'chuwi-hi8_touch'. Reboot the system. [Update] You can also download the full backup of Windows 10 drivers - BayTrail 02.08.2015 13-33-46.rar - from here or here. Use the provided Double Driver application to simply restore the missing drivers from the collection, just locate the extracted folder.
4. To switch to Android just download and install Insyde_Q2S software. Download Insyde_Q2S from here, here or here



Chuwi Hi8 Windows Drivers content (86 MB):
- chuwi-hi8_touch
- SileadTouch files for Chuwi Hi8
- Display: Intel(R) HD Graphics
- HIDClass: KMDF HID Minidriver for Touch I2C Device
- Image: Intel(R) Imaging Signal Processor 2400
- MEDIA: Intel SST Audio Device (WDM), Intel WiDi Audio Device, Realtek I2S Audio Codec
- Net:  Broadcom 802.11n Wireless SDIO Adapter
- Sensor: BMA2x2 (BMA250E BMA255 BMA222E BMA280) Accelerometer, Broadcom GNSS 4752 Geolocation Sensor,  Capella Micro CM3218x Ambient Light Sensor
- System: bcmfn2 Device, Broadcom GNSS Bus Driver - 4752, Broadcom Serial Bus Driver over UART Bus Enumerator, Camera OV2680,  Camera Sensor GC310, GPIO Controller,  GpioVirtual Controller, I2C Controller, Intel(R) Battery Management Device, Intel(R) Dynamic Platform & Thermal Framework Display Participant Driver, Intel(R) Dynamic Platform & Thermal Framework Driver, Intel(R) Dynamic Platform & Thermal Framework Generic Participant Driver, Intel(R) Dynamic Platform & Thermal Framework Power Participant Driver, Intel(R) Dynamic Platform & Thermal Framework Processor Participant Driver, Intel(R) Power Management IC Device, Intel(R) Sideband Fabric Device, Intel(R) Trusted Execution Engine Interface, IWD Bus Enumerator, UART Controller.

You're done, enjoy it! It's a beauty! ;) :)

 
 


You can now buy Chuwi Hi8 dual OS tablet from everbuying.net for only $92.89 with free shipping.

 

Don’t miss any of our future video tutorials, follow us on Youtube. Like us on Facebook. Add us in your circles on Google+. Watch our photo albums on Flickr. Subscribe now to our newsletter.

19 comentarii:

Unknown said...

How can I install all the drivers? I see many folders but no way to install

יוסי said...

I also ask how do I install Doubledriver
Thank you

danyrolux said...

@Roni Alush & @יוסי

Read the article again, it is updated.
Use Double Driver to restore the drivers as you wish...

יוסי said...

Why can not I open the new files uploaded?
  full backup of Windows 10 drivers - BayTrail 02.08.2015 13-33-46.rar
Thank you

יוסי said...

Sorry to ask so much
I was able to install all the DRIVERS
But I still have a problem with touch screen
Do you have a touch file that matches the windows 10?
Thank Yossi

danyrolux said...

יוסי@
Mannually update driver 'chuwi-hi8_touch' for KMDF HID Minidriver for Touch I2C Device. It should work

יוסי said...

Thank you very much
I was able to install only after I installed as administrator
And now all works
So once again, thank Yossi

Unknown said...

Looks like a bunch of work. I just did the upgrade and the upgrade allowed me to store files on my SD card so I had more space afterwards than before!

Unknown said...

Hi
Thank you for a great resource. Are the Double driver package drivers backed up from the official Chuwi Windows 10 image?

Unknown said...

anyone know how to get in touch with customer service for this device ?
I messed up with the touchscreen calibration, and now have no access, since the screen is not responding can't type my Pin#, trying to look for the reset button, no luck ... big mess any idea ....(-:
Tnx in advance

Yair

Unknown said...

I more or less followed these instructions (and from here: http://techtablets.com/forums/topic/windows-10-upgradeclean-installation-guide-for-dummies/
A few points:
- Make sure the tablet is fully charged before attempting this.
- The first USB hub I tried lost the mouse, the second (powered) hub worked.
- I had to download the x86 version of Win10.iso using the Chuwi in Win8 since my x64 laptop couldn’t do this.
- The USB sticks used have to be formatted FAT32
- When you go into Boot Manager, choose EFI USB Device (3rd entry I think)
- Have a magnifier glass ready!
- During Win10 install, skip all the product ID entries and after the MS agreement, be fast to select “Custom”
- For custom install you need to select Drive 0 Partition 17 Windows 14.8Gb and Format this.
- On the next boot skip product key and choose express settings (you have to do this twice).
- After start-up, right click on desktop, display settings and set size to 200% - much easier!
- Put Double Driver & drivers on a 2nd USB stick. Install DD and select Drivers Folder. Restore all drivers at once – trying individual ones results in a boot loop.
- Connect wi-fi and run Updates from Settings – there will be quite a few.
- Install Insyde Switch to Android
- I’m still not quite sure how I got touchscreen working again. I installed all the drivers and Chuwi-hi8_touch, but it still didn’t seem to work until (maybe?) I re-booted without any USB keyboard/mouse attached. Once touch screen was working I could log-in using the touchscreen keyboard and then attach a Bluetooth keyboard and mouse.
- I was concerned about activation. I kept clicking the Activate button in Settings for about a week. It kept saying “can’t do this now” and then yesterday it was Activated! No product key ever entered.
- Win10 works well on the Chuwi. The only problem is lack of memory – 3Gb free with Chrome, Word, Excel and Paint Shop Pro installed. It would be nice to be able to install programs on the SD card or remove some of the Win10 bloatware

Unknown said...

Just force install hi8 _touch drivers. It will work even it says it is not ment for this device.

ss said...
This comment has been removed by the author.
Unknown said...

If I buy a new chuwi hi8 from banggood , will it have windows 10 already installed

Unknown said...

Hello i install windows 10 pro using my keyboard and mouse and usb stick i install all the drivers in there tried to install hi8_touch thing like a 3times alreade and my touch screen is not working anyone got anyidea please how can i fix it tablet doesnt recognize the touch screen on windows propetis its show i dont have a touch pad or anything please someone can help me make it work ?
on android touch working like charm

Unknown said...

Hello, I should restore all drivers from dd or only selected?

Unknown said...

Does anyone else have issues downloading large files for this device in Windows? I've tried uninstalling the WiFi device driver and reinstalling it and there is still problems. Downloads will start fine, downloading at 7Mbps, but then drop to 0. Using the NetPerf utility to monitor wireless activity. Have also tried using a USB Ethernet device with the same problem.

David Pirtle said...

Cheers! Works a charm.

Unknown said...

I forgot my password and had to reset. Windows wouldnt re-install. How can I get it back??

Post a Comment

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Powered by Blogger