Sep 16, 2013

Download PhoenixCard v3.06


PhoenixCard is a software that let you burn Android firmwares on micro SD cards. Phoenixcard is free Windows based software designed to create bootable images and write them to connected removeable drives, such as SDCARDs or MicroSDs. The removeable drive is then placed into the target device and the device is made to boot from the removeable drive, applying an update or complete reimage to the target.  It is used especially for Allwinner A10 ARM processors.

Download PhoenixCard v3.06 from here, here or here.
[update] Now you can download PhoenixCard v3.09 from here.

Create installation SD card.
Important: This will erase the SD card


  • Download and unzip the Phoenixcard archive to a folder on your PC. 
  • Unzip the single (imagename).img from the downloaded image to an accessible folder on your Windows system.
  • Obtain a micro SD card of at least 1GB in size and connect it to your PC in some fashion. It should be accessible under a drive letter in Windows.
  • Browse to the folder where you unzipped Phoenixcard and find the PhoenixCard.exe file with the green folder icon next to it. Double click to launch. The Phoenixcard software will launch.
  • Using the drop down to the right of Disk select the windows drive letter that contains your Micro SD card.
  • Click on the image button and browse to whereever you extracted (imagename).img to, and select the file.
  • Ensure Product is selected under Write Mode. Product mode will create a self booting Micro SD designed to apply a separate image to a device.
  • Click on Burn. Pay attention to the status messages. Once it is complete you can eject the Micro SD from your windows system.




PhoenixCard User Guideline

22 comentarii:

Tik et said...

ok

peter said...

Hi there, I have a formating problem it shows me that the formating failed every time I start to work with it.no other usb device is connected. Any advice?

RANJITH KS said...

icant find img file
wher can i find it
how to install it

Vasanth kumar said...

Ranjith KS, got any link to download android image files?

Mansoor Ahmed said...

please tell me PhoenixCard_v306 zip file unzip password

Dan Stefan said...

@Mansoor Ahmed
There isn't any password, just extract it....

dewdrops said...

http://www.prestigio.com/catalogue/MultiPads/NEW_MultiPad_7.0_ULTRA_Plus#/product-support/firmware

Tom Storik said...

What to do when it writes : "Find 4 device? Please select correct the one
"

Clint said...

Mine wont give a burn option, whats going wrong

Dan Stefan said...

Try also version 3.09 from here, maybe it helps... http://chinagadgetsreviews.blogspot.ro/2014/02/download-phoenixcard-latest-version-v309.html

Bryce said...

Hi there I have tried using 3.06 and 3.09. The 3.06 says script not found, so D/L

3.09. everything seems to work fine ie phoenixcard shows all steps correctly and the

led in my trans flash unit shows that data is being written. At the end of the burn

process my TF card has had nothing written to it. I have tried disabling all other

USB devices, burning on an external card reader and changing my TF card but nothing

works.....why?????
The same system accepts read and write from my PC so it would seem it is not my TF

card that is at fault.
Using Windows 7 X64 Ultimate.
It is really weird that I can read/write correctly using the PC but not with

Phoenixcard 3.09.

Any help would be greatly appreciated,
Thanks in advance

Dan Stefan said...

@Bryce
There is something on your TF card after burning with phoenixcard, but it is a hidden linux partition, so it isn't seen by Windows, this is normal.
Try another card, try another card reader, try another PC...

Bryce said...

Thanks for the reply Dan, should I be able to see the files on a Linux machine?
Thanks again for your help.

Dan Stefan said...

@Bryce
I can't tell you, because I am not a Linux user, but you can try it, it seems very possible that...

Paulo Henrique said...

Thanks my friend

Umair Khan said...

can any body tell what i do with my SD card after run my tablet. because when i put again card in the tab they can again boot & wipe all data & make same as factory setting however the SD card is still show blanked after many time formating it ..!

please help

Dan Stefan said...

@Umair Khan
Use PhoenixCard and press 'Format to Normal' button....

James Carr said...

@ anyone that can help a novice I keep getting a message that say the image doesn't exist. Am I looking for the files in the wrong dir or am i downloading the image files wrong

Gladimir Clerge said...

burn fail,what can i do?

Dan Stefan said...

@Gladimir Clerge
Try with another card, try with another firmware image, try with another card reader, try with another PC, try with PhoenixCard v.3.09 http://chinagadgetsreviews.blogspot.ro/2014/02/download-phoenixcard-latest-version-v309.html

sandro felix said...

ejecutar como admistrador

Gian Dela Rosa said...

i succesfuly completed the procedure, but when i mounted the micro sd on my tablet, nothing happens. i only turn it on normally right? please help

Post a Comment

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Powered by Blogger