1:02 PM
danyrolux
Download latest Android 4.4 Kitkat stock firmware for Cube Talk U31GT tablet from here, here or from here. Download another Cube firmware from here.
Archive name: u31gt_V1.1_0716
Archive file size: 432 MB
Project: htt82_tb_kk
Platform: MT6582
Config_version: V1.1.1Archive file size: 432 MB
Project: htt82_tb_kk
Platform: MT6582
Baseband: MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V35_1_wg_n
Installing the ROM
1. Run flash tool “the Flash_tool.exe”
2. Choose “Scatter” file.
3. At this point, you need to remove the battery from your device and connect the device to a USB 2.0 port on your PC (USB 3.0 is not supported). You should start hearing the “dings” in Windows to signify that it detects your device.
4. Click the Download button on the Flash Tool.
5. If your device is connected properly, you will see the percentage bar change colors and start running. The one to watch is the yellow bar that goes from 0-100% indicating that the ROM is being flashed.
6. You will then get a window with a green circle, indicating that the flash is complete.
7. When the flashing process is done, disconnect the USB cable and replace the battery in your device and turn on the device. Your device will then boot into the newly installed ROM.
3. At this point, you need to remove the battery from your device and connect the device to a USB 2.0 port on your PC (USB 3.0 is not supported). You should start hearing the “dings” in Windows to signify that it detects your device.
4. Click the Download button on the Flash Tool.
5. If your device is connected properly, you will see the percentage bar change colors and start running. The one to watch is the yellow bar that goes from 0-100% indicating that the ROM is being flashed.
6. You will then get a window with a green circle, indicating that the flash is complete.
7. When the flashing process is done, disconnect the USB cable and replace the battery in your device and turn on the device. Your device will then boot into the newly installed ROM.
1 comentarii:
Great content!
Could you help me with firmware of my 10.1" tablet:
Company: Shenzhen Created Co. China
Model: Created X10S
Processor: MTK8382
Core: Quad
Screen: IPS 1600 * 800
Board No: HT76-04-140224-1815
SN: HT76 xxxx 14123100681
PN: HT76
ROM: EMMC 16G-V100
Android version: 4.4.2
Dual sim, front and back camera, ATV, etc
I have contacted the company several times with no response and i WILL NOT advice even my ENEMY to buy from them!
Help me please, the tab is barely 5 months old!
Post a Comment